Volvo XC90 Tow Hitch
Genuine Volvo Trailer Hitch for 2016 and up Volvo XC90
A towing device especially developed for the North American market. It is easy to remove the ball section by removing a pin. This makes room for Volvo's tow hitch mounted accessories.
Each Volvo towbar has been designed for your Volvo. They are an integral part of the car's body and have been tested to ensure that they meet the most stringent safety and function demands.
The towbar is equipped with Volvo's Trailer Stability Assist-technology (TSA) and interacts with your Volvo's DSTC-system1. If the trailer starts to sway back and forth at speeds in excess of 30 mph (50 km/h), TSA can brake one or more wheels to regain stability and maintain control.
The towbar consists of three main components: crossmember, ball holder and a ball with a diameter of 2". The car has provision in the bodywork for installation.
The towbar is supplied complete and ready to install, and includes certification datasheet.
The towbar is treated in several stages for optimum corrosion protection. The towbar's ball section has a zinc-nickel coating.
For high strength and tow weight rating, the towbar is designed with conventional welding.
The trailer module manages the electronic communication between the vehicle and trailer.
Member kit
| Part. No. | ||
| 31373544 | Installation Instruction |
| Part. No. | ||
| 31373545 | sold separately |
| Part. No. | ||
| 31399880 | sold separately |
| Part. No. | Description | |
| 31439147 | Cover for standard skid plate | sold separately |
| 31439251 | Cover for R-design skid plate | sold separately |
| 31439250 | Cover for accessory skid plate | sold separately |
| Part. No. | ||
| 31373661 | sold separately |
| Part. No. | ||
| 31373945 | sold separately |
| Part. No. | ||
| 31439396 | sold separately |
| Part. No. | software | |
| 31346719 | sold separately |
Facts and advantages
Thoroughly tested both in the laboratory and on the test track to fulfil Volvo's strict requirements for quality and safety
Approved according to standard SAE J684.
Multi-layer treatment for corrosion protection.
The mountings for the safety chain are clearly located and easy to access.
Supplied with necessary nuts and bolts, electrical bracket, decals and installation instructions.
Clear markings for cutting the bumper.
The ball holder is easy to remove when the towbar is not in use.
The trailer module is compatible with trailers with LED lighting.
Control function of trailer lighting, which makes it possible to control the trailer lighting in a controlled sequence.
Technical data
Accessory weight: | |
Member kit | 44 lbs (20.4 kg) |
Ball holder | 4.4 lbs (2.2 kg) |
Ball | 2.2 lbs (1.6 kg) |
Max. towing capacity: | 5000 lbs / 2250 kg |
Towball diameter: | 2" Class III |
Max. ball pressure: | 500 lbs / 226.8 kg |
Photo: | VCC09122 |
Note!
The towbar is tested for the maximum towing weight and tow hitch load, but depending on the car version, it may be lower. For precise information, see the car's instruction manual or contact your local Volvo dealer.
Note!
If the towbar is installed on cars already equipped with the accessory skid plate, it must be replaced. See Skid plate kit.
- Dynamic Stability and Traction Control.
- Ordered according to separate procedures and downloaded using VIDA.
Filter By Category
Towbar Hitch Protective Cover
Towbar Hitch Protective Cover
Towbar Hitch Protective Cover
No results found for "31373544, 31373545, 31399880, 31439147, 31439251, 31439250, 31373661, 31373945". Here are some helpful search tips:
- Search by a part name. Example: water pump.
- Be less specific. Example: brake instead of ceramic brake.
- Remove information such as make, year or model.
- Can't find the part you are looking for? Contact us and we'll find it for you!